Press and hold the menu button for 5 seconds. Press the measure button once, this will switch the rangefinder to HCD mode. Press and hold the menu button for 3 seconds to exit the menu.
How do I get out of HCD mode? Press the measure button once, this will switch the rangefinder to LOS mode. This is the tube that the LCD display is in. How do I change from yards to meters, or vice versa? Press the menu button once, then press the measure button to toggle back and forth between yards Y and meters M.
Red Dot Scopes. What does it mean if the dot is not a dot? Here are a few ways you can tell if the distortion is caused by your eye or if there is a problem with the optic: Take a photo of the dot with your phone. Face the optic towards a plain, dark background. Set the illumination at a reasonable intensity level for the environment i. Take a photo and compare what the camera is seeing to what your eye is seeing. If the shape is the same, then there may be a problem with your red dot.
Look through the dot with both eyes. If the dot changes shape from one eye to the other, the misshapen dot is likely caused by astigmatism. Look through the red dot and rotate the scope on its optical axis.
If the irregular shape of the dot rotates with the optic, there may be a problem with the optic. Try changing the battery first. Try increasing the dot intensity until the dot becomes visible in normal conditions. Red dots with digital button controls require the off button to be depressed for 5 seconds to turn the unit off. Batteries naturally put out less power as they drain.
The closer your battery gets to dying, the dimmer the dot will appear even when on maximum brightness. Change to a new battery and check to ensure the dot is at a normal brightness level. If your dot still appears much dimmer than normal, it may be defective and should be sent in for warranty service. Focus on the target rather than looking at the dot and keep both eyes open. If you happen to be looking through the optic with the objective lens cover on, this will also make the dot seem larger than normal.
With the dot at an appropriate illumination intensity and any objective cover removed, does the dot appear as it should? What does it mean if the dot is a cluster of dots, not one dot? Why is there a halo around my red dot? Why is there no green dot on my Strikefire II? My red dot is flickering. Why can't I zero my riflescope?
These are caused by one of the following: Over-tightened rings. We recommend in. Adjustable rings and bases being used are not adjusted properly. If you have adjustable rings and have questions about installing them, feel free to call us. We are happy to walk you through the process. This can sometimes be corrected with an adjustable ring or base set or a canted base. Please give us a call if you have questions on the process! A misalignment of bases. This can cause the rings to tighten unevenly around the scope tube and cause impingement of the tube or slipping of the riflescope in the rings.
When using 2-piece bases, we recommend checking alignment with alignment bars and lapping the rings into proper alignment if necessary. The scope is sliding in the rings. Check to make sure it is secure. This can happen with hard impact or other uneven force applied to the scope tube. Roll the scope in the bottom ring halves to see if it is bent. If bent, the scope will appear to lift out of the rings rather than staying flat and rotating in place. Please give us a call if this has happened.
Why does my reticle appear canted? Your leveling tools used to mount the scope, and the reticle inside your scope are properly aligned, but the way you are holding the rifle causes your eye to perceive the reticle as canted. For example, right-handed shooters shouldering a rifle commonly report a reticle appearing to be canted to the left, or counter-clockwise.
Left-handed shooters will generally report seeing the reticle canted to the right or clockwise. To fix this, try positioning yourself completely behind the rifle chin aligned with the buttstock looking through the riflescope at the reticle straight-on. This tends to eliminate that illusion created by having your head turned slightly while shouldering the rifle. Aiming at a target or background that is uneven , or shooting from uneven ground may cause a reticle to appear canted.
Moving to more level ground may eliminate this canted appearance. A shooter not accustomed to shooting with a bubble level tool installed on their rifle may make the mistake of believing the reticle is canted because of the way the rifle needs to be held in order for the reticle to be level.
You can verify this again by getting completely behind the rifle to confirm proper alignment. Your bubble level is sitting on top of the turret cap. This can skew your results by making the riflescope turret appear to be sitting level in relation to the rifle when it is not actually sitting level. Sometimes, the turret cap or the fiber optic indicator on the turret cap will sit crooked and cause the bubble level to be canted slightly.
Rather than using the top of the turret cap, try putting the level on the inner turret post top or using feeler gauges on the bottom of the scope to level the scope. Your bubble level is not accurate.
To test, place it on a table and note the location of the bubble. Spin the level degrees and note the location of the bubble. If it is not in the same spot, your level is not level. View: Gallery View. Set Includes. Item Depth. Buying Format All Listings filter applied. Only 1 left! Balboa Heater Tube Assembly 5.
Only 2 left. Only 3 left. Spa Control Pack Gecko in. Free shipping. Results Pagination - Page 1 1 2 3 4 5 6 7 8 9 Top Rated. See All - Top Rated. You May Also Like. Browse by Brand. American Standard. Available hot tub replacement parts Hot tubs have a variety of parts that may need replacing. Some of the parts you can buy on eBay are: Pumps: The hot tub pump circulates water in the tub. It powers the jets and creates the relaxing bubbles.
Industry insiders are reporting that Diamondback's bank has foreclosed on them. I guess they had a loan or line of credit, or maybe a mortgage. Anyway, the bank is now in the process of liquidating their assets. In this episode of Master Spas TV, you'll learn how to operate hot tub temperature controls, set spa filtration cycles, and schedule maintenance reminders as.
We suggest that you take some time to carefully review all seven sections. Looking for a specific Diamondback Fitness owner's manual?
0コメント